Description:

The DN100 has become an established favourite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN100 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN100 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 k Ohm load. This increased headroom means that much higher level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN100 offers a very wide dynamic range, and only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.

Output:

• Type Transformer Isolated, balanced Impedance: 300 Ohm

• Connector: 3 pin XLR

• Max. Level 10dBu with

• load: >2k Ohm

• Min. load: 600 Ohm

Specifications:

• High-headroom design with +48 V phantom power for extended dynamic range

• Fully transformer-isolated design ensures electrical separation between PA and stage equipment

• 30 dB input pad and earth lift switches

• Features Kensington lock for added security

• Aluminium extrusion casing with protective silicone rubber sleeve

• Compact and rugged design

• Balanced line input on Neutrik XLR and high impedance input and link output on 1/4 inch TRS connectors

• Noise: -100dBu, 20Hz to 20kHz unweighted, with input terminated by 10k resistor

• Frequency response: +0.5/-1dB 20Hz to 20kHz

• Distortion (THD+N) output: <0.01% @ 1kHz, +4dBu

• Voltage: +48V Phantom

• Current consumption: <10mA

• Dimensions (LxWxH): 142 x 106 x 60 mm (5.6 x 4.2 x 2.35 inch)

• Weight: 1 kg

Downloads:

• Manual